About Us ~ What's New

The details of the last six ESDU Data Releases and the current MMDH Supplement are listed below.

• TM 190 : ESDU TECHNICAL MEMORANDUM Aircraft performance from flight test: An example of the use of manoeuvring flight
  New.
  Series: Performance
  Other collections: Aerospace Package
• 00012 : The acoustic attenuation of absorbent linings in cylindrical flow ducts.
  Updated to Amendment C. New/Modified VIEWpac program. New/Modified ESDUpac program.
  Series: Aircraft Noise
  Other collections: Aerospace Package, Noise in Nuclear Facilities
• 02020 : An introduction to aircraft noise.
  Updated to Amendment C.
  Series: Aircraft Noise
  Other collections: Aerospace Package
• 85031 : Crack resistance curves.
  New/Modified Toolbox App.
  Series: Fatigue - Fracture Mechanics
  Other collections: Aerospace Package, Aerostructures Package, Automotive Collection

• TM 192 : ESDU TECHNICAL MEMORANDUM Analysis of aircraft tests on flooded runways: an empirical approach
  New.
  Series: Performance
  Other collections: Aerospace Package
• 11005 : Prediction of near-field and far-field harmonic noise from subsonic propellers with non-axial inflow
  Updated to Amendment B. New/Modified ESDUpac program.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package
• 99006 : Computer-based estimation procedure for near-field single-stream jet noise.
  Updated to Amendment C. New/Modified VIEWpac program.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package
• TM 165 : ESDU TECHNICAL MEMORANDUM Analysis of ground-rolling tests through water with a Canberra aircraft
  Updated to Amendment A.
  Series: Performance
  Other collections: Aerospace Package

• 16001 : A practical guide to turbulence and flow measurement by thermal anemometry (CTA), laser-Doppler anemometry (LDA) and particle-image velocimetry (PIV)
  Part 1: Overview and Selection of Measurement Technique
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package
• 16002 : A practical guide to turbulence and flow measurement by thermal anemometry (CTA), laser-Doppler anemometry (LDA) and particle-image velocimetry (PIV)
  Part 2: constant-temperature anemometry
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package
• 17008 : A practical guide to turbulence and flow measurement by thermal anemometry (CTA), laser-Doppler anemometry (LDA) and particle-image velocimetry (PIV)
  Part 3: laser-Doppler anemometry
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package
• 17009 : A practical guide to turbulence and flow measurement by thermal anemometry (CTA), laser-Doppler anemometry (LDA) and particle-image velocimetry (PIV)
  Part 4: particle-image velocimetry
  New.
  Series: Transonic Aerodynamics
  Other collections: Aerospace Package
• 17011 : Power spectral density and bandwidth correction of spectrum level
  New.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package, Automotive Collection
• TM 188 : Air and ground temperature
  New.
  Series: Performance
  Other collections: Aerospace Package
• TM 189 : Analysis of tests on a convergent nozzle in an altitude test facility
  New.
  Series: Performance
  Other collections: Aerospace Package
• 68020 : The compressible two-dimensional turbulent boundary layer, both with and without heat transfer, on a smooth flat plate, with application to wedges, cylinders, and cones.
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment
• 74036 : Drag due to a circular cavity in a plate with a turbulent boundary layer at subsonic, transonic and supersonic speeds
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 75028 : Drag due to grooves in a flat plate with a turbulent boundary layer, at subsonic and supersonic speeds
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 75031 : Drag of two-dimensional steps and ridges immersed in a turbulent boundary layer for Mach numbers up to 3.
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 76016 : Generalisation of smooth continuous stress-strain curves for metallic materials.
  New/Modified Toolbox App.
  Series: Structures
  Other collections: Structures Design Collection, Aerospace Package, Aerostructures Package
• 77021 : Properties of a standard atmosphere.
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 78008 : Physical properties of design atmospheres.
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 89052 : Construction of inelastic stress-strain curves from minimal materials data (computer program).
  New/Modified Toolbox App.
  Series: Stress and Strength
  Other collections: Aerospace Package, Aerostructures Package, Nuclear Package, Nuclear Plant Mechanical/Structural Design
• TM 169 : ESDU TECHNICAL MEMORANDUM Wing lift-curve slope in inviscid subsonic flow: Improvements to the Helmbold-Diederich equation and comparison with data from ESDU 70011
  New/Modified Toolbox App.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package, Aerofoils and Wings Segment

• 13009 : Computer program for calculation of aerodynamic centre of wing-fuselage-nacelle combinations
  Updated to Amendment A.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 74036 : Drag due to a circular cavity in a plate with a turbulent boundary layer at subsonic, transonic and supersonic speeds
  New/Modified ESDUpac program.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 75028 : Drag due to grooves in a flat plate with a turbulent boundary layer, at subsonic and supersonic speeds
  New/Modified ESDUpac program.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package
• 75031 : Drag of two-dimensional steps and ridges immersed in a turbulent boundary layer for Mach numbers up to 3.
  New/Modified ESDUpac program.
  Series: Aerodynamics
  Other collections: Aerodynamics Design Collection, Aerospace Package

• TM 185 : Air data calibration using a GPS/INS (EGI)
  New.
  Series: Performance
  Other collections: Aerospace Package
• 14014 : A theoretically-based method for predicting static-to-flight effects on coaxial jet noise
  Re-issue 2. New/Modified ESDUpac program.
  Series: Aircraft Noise
  Other collections: Aerospace Package
• 76020 : Estimation of the maximum discrete frequency noise from isolated rotors and propellers.
  Updated to Amendment B. New/Modified VIEWpac program.
  Series: Aircraft Noise
  Other collections: Aerospace Package
• 11005 (since amended ~ see current version) : Prediction of near-field and far-field harmonic noise from subsonic propellers with non-axial inflow
  Amendment A.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package
• 11005 : Prediction of near-field and far-field harmonic noise from subsonic propellers with non-axial inflow
  New/Modified VIEWpac program.
  Series: Vibration and Acoustic Fatigue, Aircraft Noise
  Other collections: Aerospace Package, Aerostructures Package

• MMPDS-12 Chapter 1 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 1 - INTRODUCTION
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 2 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 2 - STEEL ALLOYS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 3 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 3 - ALUMINUM ALLOYS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 4 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 4 - MAGNESIUM ALLOYS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 5 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 5 - TITANIUM ALLOYS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 6 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 6 - HEAT-RESISTANT ALLOYS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 7 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 7 - MISCELLANEOUS ALLOYS AND HYBRID MATERIALS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 8 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 8 - STRUCTURAL JOINTS
  Re-issue 12.
  Series: none
  Other collections: MMPDS
• MMPDS-12 Chapter 9 : Metallic Materials Properties Development and Standardization (MMPDS):
  CHAPTER 9 - GUIDELINES
  Re-issue 12.
  Series: none
  Other collections: MMPDS

• EN2087, new issue
• EN2088, new issue
• EN2089, new issue
• EN2090, new issue
• EN2092, new issue
• EN2395, new issue
• EN2422, new issue
• EN2511, new specification
• EN2632, new issue
• EN2684, new issue
• EN2694, new specification
• EN2702, new specification
• EN2703, new issue
• EN2731, new issue
• EN2732, new issue
• EN2802, new issue
• EN2803, new issue
• EN3333, new specification
• EN3347, new specification
• EN3474, new specification
• EN3490, new issue
• EN3552, new issue
• EN4007, new issue
• EN4202, new issue
• prEN2172, new specification
• prEN2174, new specification
• prEN2209, new amendment
• prEN2278, new issue
• prEN2280, new amendment
• prEN2450, new amendment
• prEN2764, new specification
• prEN3509, new amendment
• prEN3680, new specification
• prEN4318, new specification
• S131, new amendment
• S140, new amendment
• S146, new amendment
• S538, new amendment
• S93, new issue
• S98, new amendment
• T2, new amendment