ESDU AZ Index: TIRTQ
 see also
 Titanium Alloys
 Titanium Sheets
 Effect of Fretting on Fatigue Strength, 88027
 see also
 Titanium Alloys
 see also
 Fretting Fatigue
 Lugs (Fatigue Strength)
 Materials Properties
 Screw Threads
 SkinRib Joints in Titanium Alloys
 Titanium Alloy (Ti10V2Fe3Al)
 Titanium Alloy (Ti11Sn5Zr2Al1Mo)
 Titanium Alloy (Ti2.5Cu)
 Titanium Alloy (Ti4Al3Mo1v)
 Titanium Alloy (Ti4Al4Mo2Sn0.5Si)
 Titanium Alloy (Ti4Al4Mo4Sn0.5Si)
 Titanium Alloy (Ti5Al2.5Sn)
 Titanium Alloy (Ti6Al2Sn2Zr2Mo)
 Titanium Alloy (Ti6Al2Sn4Zr2Mo)
 Titanium Alloy (Ti6Al2Sn4Zr6Mo)
 Titanium Alloy (Ti6Al4V)
 Titanium Alloy (Ti6Al5Zr0.5Mo0.25Si)
 Titanium Alloy (Ti6Al6V2Sn)
 Titanium Alloy (Ti8Al1Mo1V)
 Bearing, Torsion and Shear Strength 00932 (MMDH)
 Composition of Specific Specifications 00932 (MMDH)
 Corrosion Resistance 00932 (MMDH)
 Creep Behaviour and Elongation 00932 (MMDH)
 Density 00932 (MMDH)
 Elastic Moduli 00932 (MMDH)
 Electrical Conductivity 00932 (MMDH)
 Exfoliation Corrosion Resistance 00932 (MMDH)
 Fatigue Crack Propagation Rate (Short Cracks), 92023
 Fracture Toughness 00932 (MMDH)
 Generalised StressStrain Curves, 76016
 program to compute from modulus and two inelastic points, 89052
 Poisson's Ratio 00932 (MMDH)
 Proof Stresses in Compression 00932 (MMDH), 76016
 Proof Stresses in Tension 00932 (MMDH)
 Specific Heat Capacity 00932 (MMDH)
 Stress Corrosion Resistance 00932 (MMDH)
 Tensile Strength 00932 (MMDH)
 Thermal Conductivity 00932 (MMDH)
 Thermal Expansion Coefficient 00932 (MMDH)
 Weldability 00932 (MMDH)
 see also
 Titanium Alloys
 Fatigue Crack Propagation Rate for Bar, 82015
 characteristic slopes of plots against stress intensity factor, 82015
 effect of heat treatment and microstructure, 82015
 Fatigue Strength Under Axial Loading, 19001
 Fatigue Strength Under Bending for Forging, 19001
 Threshold Stress Intensity Factor Range, 82015
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading, 19001
 see also
 Titanium Alloys
 Fatigue Crack Propagation Rate for Bar, 82015
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading, 19001
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 Fatigue Strength Under Bending for bar, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Bending for Rod, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Bending for Rod, 19001
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 Effect of Fretting on Fatigue Strength, 88027
 Fatigue Crack Propagation Rate for Bar, 82015
 characteristic slopes of plots against stress intensity factor, 82015
 effect of mean stress (or stress ratio), 82015
 Fatigue Strength Under Bending for Bar, 19001
 effect of notches, 19001
 Threshold Stress Intensity Factor Range for Bar, 82015
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 Fatigue Crack Propagation Rate for Bar and Forgings, 82015
 characteristic slopes of plots against stress intensity factor, 82015
 effect of mean stress (or stress ratio), 82015
 Fatigue Crack Propagation Rate for Sheet
 characteristic slopes of plots against stress intensity factor, 89051
 effect of mean stress (or stress ratio), 89051
 Fatigue Strength Under Axial Loading for Bar or Sheet, 19001
 effect of notches, 19001
 Fatigue Strength Under Axial Loading for Cast Form, 19001
 effect of notches, 19001
 Fatigue Strength Under Bending for Sheet, 19001
 effect of notches, 19001
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading for Bar, 19001
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 see also
 Resistance Curves
 Titanium Alloys
 Effect of Fretting on Fatigue Strength, 88027
 Fatigue Crack Propagation Rate for Bar and Forgings, 82015, 92023
 characteristic slopes of plots against stress intensity factor, 82015
 effect of heat treatment and microstructure, 82015
 effect of mean stress (or stress ratio), 82015
 Fatigue Crack Propagation Rate for Plate, 82015, 90028, 92023
 characteristic slopes of plots against stress intensity factor, 82015, 90028
 effect of corrosive and other environments, 90028
 effect of heat treatment and microstructure, 82015, 90028
 effect of loading frequency, 90028
 effect of mean stress (or stress ratio), 82015
 Fatigue Crack Propagation Rate for Sheet, 89051, 90028, 92023
 characteristic slopes of plots against stress intensity factor, 89051, 90028
 effect of corrosive and other environments, 90028
 effect of heat treatment, 89051
 effect of loading frequency, 90028
 effect of mean stress (or stress ratio), 89051
 Fatigue Crack Propagation Rate (Short Cracks) for Bar, 92023
 Fatigue Crack Propagation Rate (Short Cracks) for Plate, 92023
 Fatigue Crack Propagation Rate (Short Cracks) for Sheet, 92023
 Fatigue Strength Improvement Obtained by Shot Peening, 19004

 see also
 Shot Peening
 behaviour with fretting and at elevated temperature, 19004
 Fatigue Strength Under Acoustic Loading, 10011
 Fatigue Strength Under Axial Loading for Cast Form, 19002
 effect of machining, 19002
 effect of mean stress, 19002
 effect of notches, 19002
 effect of shot peening, 19002
 Fatigue Strength Under Axial Loading for Extruded Form, 19002
 effect of mean stress, 19002
 effect of notches, 19002
 Fatigue Strength Under Axial Loading or Bending for Bar, Rod or Sheet, 19002
 effect of annealing, 19002
 effect of mean stress, 19002
 effect of notches, 19002
 effect of or forging, 19002
 effect of solution treatment and age hardening, 19002
 Resistance Curves (RCurves), 20003
 Threshold Stress Intensity Factor Range for Bar, Forgings and Plate, 82015
 effect of mean stress (or stress ratio), 82015
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 Fatigue Crack Propagation Rate for Plate, 82015
 characteristic slopes of plots against stress intensity factor, 82015
 effect of heat treatment and microstructure, 82015
 effect of mean stress (or stress ratio), 82015
 Fatigue Crack Propagation Rate for Sheet, 90028
 characteristic slopes of plots against stress intensity factor, 90028
 effect of corrosive and other environments, 90028
 effect of loading frequency, 90028
 Fatigue Strength Under Axial Loading for Bar or Plate, 19001
 effect of mean stress (or stress ratio), 19001
 effect of notches, 19001
 Fatigue Strength Under Axial Loading for Forgings, 19001
 effect of notches, 19001
 see also
 Titanium Alloys
 Fatigue Crack Propagation Rate for Plate, 82015, 90028
 characteristic slopes of plots against stress intensity factor, 90028
 effect of corrosive and other environments, 90028
 effect of heat treatment, 90028
 effect of loading frequency, 90028
 Fatigue Crack Propagation Rate for Sheet
 characteristic slopes of plots against stress intensity factor, 89051
 effect of heat treatment, 89051
 effect of mean stress (or stress ratio), 89051
 effect of thickness, 89051
 Threshold Stress Intensity Factor Range for Plate, 82015
 see also
 Titanium Alloys
 Fatigue Strength Under Bending for Bar, 19001
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 see also
 Titanium Alloys
 Fatigue Strength Under Axial Loading for Bar or Plate, 19001
 see also
 Interference Fit
 Bolted Joints
 effect of tilted nut seating on fatigue strength of steel screw threads, 67034
 effect on load distribution with bolt pretension, 13015, 13016, 85021
 Calculation of Effect on a Parameter
 of variabilities of component contributions, 91017
 Effect on Flexural Buckling of Struts, 88034, 90002, STRUCT 01.01.01
 Effect on Locking With Double Lock Nuts, 14002
 Effect on Stress Concentration Due to Double Radius Fillets
 round rods and tubes, 75033
 see also
 Heat Pipes
 Density
 pressure and temperature variation for saturated gas and liquid, 80017
 Dynamic Viscosity
 pressure and temperature variation for saturated gas and liquid, 80017
 Specific Heat Capacity
 pressure and temperature variation for saturated liquid, 80017
 Specific Latent Heat of Vaporisation
 pressure and temperature variation at saturation, 80017
 Surface Tension
 pressure and temperature variation at saturation, 80017
 Thermal Conductivity
 pressure and temperature variation for saturated liquid, 80017
 Vapour Pressure
 variation along saturation curve, 80017
 Discussion of Origin and Characteristics, 87034
 Use to Pretension Bolted Joints

 see
 Bolted Joints
 Description of Behaviour of Flat Panels Under Compression, 72012
 Struts Under Compression
 see also
 Aerodynamic Loading
 Beams of Angle Section
 sources of data for twodimensional crossflow, 82007
 Beams of HSection
 sources of data for twodimensional crossflow, 82007
 Lattice Towers of FlatSided and/or Tubular Members, 81028
 effect of ancillary components, 81028
 RectangularSection Cylinders Normal to Flow
 effect of incidence in turbulent shear flow, 80003
 effect of section aspect ratio in turbulent shear flow, 80003
 SquareSection Cylinders Normal to Flow
 effect of incidence in turbulent shear flow, 80003
 Dynamic Response of Buildings and Structures to Turbulence and Wind
 see also
 Angle Sections with Bulbs
 Definition, STRUCT 00.07.00
 see also
 Anemometric Data Correction
 Behind Normal Shock Wave in Hypersonic Flow
 ratio to static pressure, 93020
 In Steady, Spatially NonUniform Axial Compressible Flow
 as part of reference set of average flow properties for caloricallyperfect gas, 95011
 as part of reference set of average flow properties for thermallyperfect gas, 97029
 Isentropic Flow of Calorically Imperfect Diatomic Gas
 effect of characteristic vibrational temperature, AERO S.00.01.10
 variation with Mach number, AERO S.00.01.10
 Isentropic Flow of Perfect Gas
 variation with Mach number and specific heat capacity, 74028, AERO S.00.03.06, AERO S.00.03.07
 variation with Mach number in air, 69026, 73017, 74028, 82018, AERO 00.03.05
 Isentropic Flow of Real Air
 variation with Mach and Reynolds numbers, 73017
 Measurement of During Flight Testing, 20006
 In Steady, Spatially NonUniform Axial Compressible Flow
 as part of reference set of average flow properties for caloricallyperfect gas, 95011
 as part of reference set of average flow properties for thermallyperfect gas, 97029
 Isentropic Flow of Calorically Imperfect Diatomic Gas
 effect of characteristic vibrational temperature, AERO S.00.01.10
 variation with Mach number, AERO S.00.01.10
 Isentropic Flow of Perfect Gas
 relation with static temperature, 74028
 variation with Mach number and specific heat capacity, 74028, 97017, AERO S.00.03.06, AERO S.00.03.07
 variation with Mach number in air, 69026, 74028, AERO 00.03.05
 Isentropic Flow of Real Air
 variation with Mach and Reynolds numbers, 73017
 see
 Landing
 Dynamic Response to Turbulence and Wind
 Mean Forces and Moments Due to Wind
 Mechanical VIbration Characteristics

 see
 Buildings
 Dynamic Response to Turbulence and Wind
 Mean Forces, Moments and Pressures Due to Wind
 Mechanical Vibration Characteristics

 see
 Buildings