ESDU 72019
Buckling of flat isotropic plates under uniaxial and biaxial loading.
Abstract:
ESDU 72019 gives the elastic buckling stress under longitudinal compression of a plate with edge conditions: (1) short sides simplysupported and long sides simplysupported, clamped or elastically restrained laterally and/or in rotation, (2) short sides simplysupported and one long side free while the other is either clamped or simplysupported, (3) short sides clamped and long sides either clamped or simplysupported. The elastic buckling stress is also given under biaxial compression with edge conditions: (1) short sides simplysupported and long sides either clamped or simplysupported, (2) short sides clamped and long sides either clamped or simplysupported. Data are given to correct the buckling stress for the effects of plasticity.
See ESDU 81047 and ESDUpac A8147 for a computer program that treats buckling of rectangular plates.
Indexed under:
Details:
Data Item ESDU 72019  

Format: 

Status: 

Previous Releases:  
ISBN: 

The Data Item document you have requested is available only to subscribers or purchasers.
 Subscribers login here.
 If you are not an ESDU subscriber you can
 find out how to subscribe, or
 purchase this Data Item from the IHS Standards Store.
This Data Item is complemented by the following software:
Name  Details  

ESDUpac A8147 
This program is only available to subscribers. 
The graphs listed below are available only to subscribers.
 Subscribers login here.
 If you are not an ESDU subscriber find out how to subscribe.
This Data Item contains 12 interactive graph(s) as listed below.
Graph  Title 

Figure 1  Part 1  Uniaxial compression, ends simplysupported, sides elastically restrained against lateral motion and either fixed or free in rotation 
Figure 1  Part 2  Uniaxial compression, ends simplysupported, sides elastically restrained against lateral motion and either fixed or free in rotation 
Figure 2  Uniaxial compression, ends simplysupported, sides elastically restrained against rotation but free to move laterally 
Figure 3  Uniaxial compression of long plates, ends simplysupported, sides elastically restrained against rotation and lateral motion 
Figure 4  Uniaxial compression, ends clamped 
Figure 5  Uniaxial compression, ends simplysupported 
Figure 6  Biaxial compression, ends and sides simplysupported 
Figure 7  Biaxial compression, ends simplysupported, sides clamped 
Figure 8  Biaxial compression, ends clamped, sides simplysupported 
Figure 9  Biaxial compression, ends and sides clamped 
Figure 10  Part 1  Plasticity reduction factor 
Figure 10  Part 2  Plasticity reduction factor 
ESDU Series:
 Aerodynamics
 Aircraft Noise
 Composites
 Dynamics
 Fatigue  Endurance Data
 Fatigue  Fracture Mechanics
 Fluid Mechanics, Internal Flow
 Fluid Mechanics, Internal Flow (Aerospace)
 Heat Transfer
 Mechanisms
 Performance
 Physical Data, Chemical Engineering
 Stress and Strength
 Structures
 Transonic Aerodynamics
 Tribology
 Vibration and Acoustic Fatigue
 Wind Engineering
ESDU Packages:
ESDU Series