ESDU Strength Analysis of Struts and Beams Segment
This Segment gives comprehensive and continually expanding, rigorously evaluated information for the strength analysis of lightweight structures such as those used in aerospace.
Data are given on elastic or inelastic stresses, strains, displacements or buckling loads under static loading. They range from general data to the analysis of specific struts and beams in metallic or composite structures.
The range of configurations and geometries gives a comprehensive selection that will meet the structural analyst's idealisation needs. Thus it will allow both detailed, accurate analyses of critical components, and initial estimates, with appropriate idealisation, that will facilitate the economic use of finite element or other expensive computational techniques on problems where no specific analysis is currently available.
The Strength Analysis of Struts and Beams Segment focuses on:
This Collection contains:
Structures Series organisation: preface amendment record.
- ESDU 00030
Information on the use of ESDU 18002, ESDU 18003 and ESDU 18004
Form factors for circular sections under combined bending and axial load
Form factors for flanged sections under combined bending and axial load
Form factors for angle, tee and channel sections under combined bending and axial load
The deflections and slopes of shafts or beams of constant or stepped section.
Flange efficiency factors for curved beams under bending in the plane of curvature.
Maximum inelastic bending moments and form factors for symmetric bending of beams.
Maximum inelastic bending moments and end loads in fixed ratio for beam sections of general polygonal shape (computer program).
Inelastic bending moments, end loads, stresses and strains for beam sections of general polygonal shape.
- ESDU 18001
ESDU STRUCT 01.01.01
The strength of struts.
ESDU STRUCT 01.01.08
Local instability of struts with flat sides.
ESDU STRUCT 01.01.10
Torsional instability of stringers and struts of angle section.
ESDU STRUCT 01.01.19
Local buckling and crippling of rectangular tube section struts.
ESDU STRUCT 01.01.23
The buckling of a composite strut.
ESDU STRUCT 01.01.24
The compressive instability of hydraulic jacks.
Buckling of struts. Lipped and unlipped channel sections.
Buckling of struts. Lipped and unlipped Z sections.
Local buckling and crippling of I, Z and channel section struts.
Guide to Items on the strength and stability of struts.
Struts with lateral loads.
Flexural and torsional-flexural buckling of thin-walled open section struts.
Struts: strength under flexural, local and inter-rivet buckling.
Equivalent lengths of struts (for use in buckling calculations).
- ESDU STRUCT 01.01.01
- Aircraft Noise
- Fatigue - Endurance Data
- Fatigue - Fracture Mechanics
- Fluid Mechanics, Internal Flow
- Fluid Mechanics, Internal Flow (Aerospace)
- Heat Transfer
- Physical Data, Chemical Engineering
- Stress and Strength
- Transonic Aerodynamics
- Vibration and Acoustic Fatigue
- Wind Engineering