ESDU STRUCT 01.01.23
The buckling of a composite strut.
Abstract:
ESDU Struct 01.01.23 provides graphs from which the flexural buckling load on a composite strut of two components may be determined for all combinations of simplysupported and clamped end conditions and of clamped and free end conditions (excluding freefree). The graphs, each of which applies to one pair of end conditions, give a series of curves for the buckling load. Each curve is for a value of the ratio of the product of the modulus of elasticity of the material of a chosen first component and the minimum moment of inertia of its section to that product for the second component; the curves are plotted against the ratio of the length of the second component to the overall length of the composite strut. The buckling load is plotted in a nondimensional form, factored by the square of the total length of the strut and divided by the product of the modulus of elasticity of the material of the second component and the minimum moment of inertia of its section. It is assumed that each component of the strut is of constant flexural rigidity. It is also assumed that the two components are rigidly attached end to end, that their centroids lie on the axis of loading, and that their axes of minimum inertia are coplanar. The curves may also be applied to a symmetrical strut of three components. The basis of the curves is theoretical, and the equations from which they were derived are given. A worked example illustrates the use of the data.Indexed under:
Details:
Data Item ESDU STRUCT 01.01.23  

Format: 

Status: 

Previous Releases: 

ISBN: 

The Data Item document you have requested is available only to subscribers or purchasers.
 Subscribers login here.
 If you are not an ESDU subscriber you can
 find out how to subscribe, or
 purchase this Data Item from the IHS Standards Store.
The graphs listed below are available only to subscribers.
 Subscribers login here.
 If you are not an ESDU subscriber find out how to subscribe.
This Data Item contains 6 interactive graph(s) as listed below.
Graph  Title 

Figure 1  Ends simplysupported 
Figure 2  Ends clamped 
Figure 3  One end simplysupported, other end clamped 
Figure 4  One end clamped, other end simplysupported 
Figure 5  One end clamped, other end free 
Figure 6  One end free, other end clamped 
Explore ESDU
ESDU Series:
 Aerodynamics
 Aircraft Noise
 Composites
 Dynamics
 Fatigue  Endurance Data
 Fatigue  Fracture Mechanics
 Fluid Mechanics, Internal Flow
 Fluid Mechanics, Internal Flow (Aerospace)
 Heat Transfer
 Mechanisms
 Performance
 Physical Data, Chemical Engineering
 Stress and Strength
 Structures
 Transonic Aerodynamics
 Tribology
 Vibration and Acoustic Fatigue
 Wind Engineering
ESDU Packages:
Copyright © 2020 IHS Markit. All Rights Reserved