ESDU STRUCT 00.07.01
Torsion and secondary warping constants for a bulb angle.
Abstract:
ESDU Struct 00.07.01 gives graphs for the torsion constant of a bulb angle section with legs of equal thicknesses, and for the secondary warping constant of a bulb angle section with legs of equal or unequal thicknesses. Each constant is plotted as a fraction of its value for a plain section with no corner radius. The torsion constant is a function of bulb radius, developed length of the median line of the section to the centre of the bulb, and the leg thickness. It is calculated taking the contribution of the corner radius to be that of a bar of radius equal to the thickness of the leg, which is adequate for radii between 1.2 and 1.8 times that thickness. The warping constant is a function of bulb radius, and of the thicknesses and lengths of the two legs. The effect of the corner radius is negligible. The formulae from which the curves were calculated are given. ESDU Struct 00.07.00 defines the torsion constant and the secondary warping constant.Indexed under:
Details:
Data Item ESDU STRUCT 00.07.01  

Format: 

Status: 

Previous Releases: 

ISBN: 

The Data Item document you have requested is available only to subscribers or purchasers.
 Subscribers login here.
 If you are not an ESDU subscriber you can
 find out how to subscribe, or
 purchase this Data Item from the IHS Standards Store.
Explore ESDU
ESDU Series:
 Aerodynamics
 Aircraft Noise
 Composites
 Dynamics
 Fatigue  Endurance Data
 Fatigue  Fracture Mechanics
 Fluid Mechanics, Internal Flow
 Fluid Mechanics, Internal Flow (Aerospace)
 Heat Transfer
 Mechanisms
 Performance
 Physical Data, Chemical Engineering
 Stress and Strength
 Structures
 Transonic Aerodynamics
 Tribology
 Vibration and Acoustic Fatigue
 Wind Engineering
ESDU Packages:
Copyright © 2020 IHS Markit. All Rights Reserved