ESDU AERO W.S.05.03.01
Pressure distribution on blunt noses of twodimensional sections at zero incidence in supersonic flow.
Abstract:
ESDU Aero W.S.05.03.01 gives empiricallyderived curves of static pressure as a fraction of the stagnation pressure behind a normal shock plotted against the ordinate of the nose measured from the centreline for three shapes: flat, semicircular, and semielliptical with nose length to thickness ratio of 0.25. An expression is given for the stagnation pressure behind a normal shock or ESDU Aero S.00.03.15 may be used to evaluate it graphically. For the semicircular shape some variation with Mach number was found and guidance is given on the magnitude of that effect for Mach numbers up to 6. It is noted that due to this effect the drag of that nose shape should be obtained from ESDU Aero W.S.02.03.10 rather than by integration of the data given in these curves. For the other shapes data applied to Mach numbers only up to 2 but showed no Mach number effect and it is suggested they would apply to higher Mach numbers. For an ellipticalshaped nose section with length to thickness ratio greater than 0.25 there was found to be a greater effect of Mach number and a single curve could not be given; a simple empirical approach is suggested relating the pressure coefficient at any point to the slope and the stagnation pressure coefficient there. Values given by Newtonian impact theory are suggested to define maxima to which pressure coefficients tend as Mach number increases. The application of the data to threedimensional wings is discussed.Indexed under:
Details:
Data Item ESDU AERO W.S.05.03.01  

Format: 

Status: 

Previous Releases: 

ISBN: 

The Data Item document you have requested is available only to subscribers or purchasers.
 Subscribers login here.
 If you are not an ESDU subscriber you can
 find out how to subscribe, or
 purchase this Data Item from the IHS Standards Store.
Explore ESDU
ESDU Series:
 Aerodynamics
 Aircraft Noise
 Composites
 Dynamics
 Fatigue  Endurance Data
 Fatigue  Fracture Mechanics
 Fluid Mechanics, Internal Flow
 Fluid Mechanics, Internal Flow (Aerospace)
 Heat Transfer
 Mechanisms
 Performance
 Physical Data, Chemical Engineering
 Stress and Strength
 Structures
 Transonic Aerodynamics
 Tribology
 Vibration and Acoustic Fatigue
 Wind Engineering
ESDU Packages:
 Home  AZ index  Contact Us  Help  About Us  Terms of Use  Privacy Policy  How we use cookies  How to Subscribe 
© 19992019 IHS ESDU, part of IHS Inc.