ESDU AZ Index: CICOM
 see
 Afterbody
 Shear Centre, STRUCT 00.06.04
 Introduction to Data Items on, STRUCT 03.06.00
 Under Concentrated Loads and Couples
 bending moments, STRUCT 03.06.01
 direct forces, STRUCT 03.06.02
 radial deflections, STRUCT 03.06.04
 shear forces, STRUCT 03.06.03
 Equations for Deflections and Forces Due to Applied Concentrated Couples and Loads
 angular deflections, 83043
 bending moments, 83043
 direct and shear forces, 83043
 radial and tangential deflections, 83043
 shear flow from shell, 83043
 Graphical Data for Deflections and Forces Due to Applied Concentrated Couples
 angular deflections, STRUCT 03.06.15
 bending moments, STRUCT 03.06.06
 direct forces, STRUCT 03.06.09
 effect of adjacent frames, STRUCT 03.06.17
 effect of shell longitudinal flexibility, STRUCT 03.06.17
 radial and tangential deflections, STRUCT 03.06.15
 shear flow from shell, STRUCT 03.06.16
 shear forces, STRUCT 03.06.12
 Graphical Data for Deflections and Forces Due to Applied Concentrated Radial Loads
 angular deflections, STRUCT 03.06.15
 bending moments, STRUCT 03.06.08
 direct forces, STRUCT 03.06.11
 effect of adjacent frames, STRUCT 03.06.17
 effect of shell longitudinal flexibility, STRUCT 03.06.17
 radial and tangential deflections, STRUCT 03.06.15
 shear flow from shell, STRUCT 03.06.16
 shear forces, STRUCT 03.06.14
 Graphical Data for Deflections and Forces Due to Applied Concentrated Tangential Loads
 angular deflections, STRUCT 03.06.15
 bending moments, STRUCT 03.06.07
 direct forces, STRUCT 03.06.10
 effect of adjacent frames, STRUCT 03.06.17
 effect of shell longitudinal flexibility, STRUCT 03.06.17
 radial and tangential deflections, STRUCT 03.06.15
 shear flow from shell, STRUCT 03.06.16
 shear forces, STRUCT 03.06.13
 Aerodynamic Characteristics

 see
 Excrescences
 Stress Analysis
 Biaxial Loading
 stress concentration factors for circular and optimised shape holes in large plates, 15005
 Effect of Buckling in Shear
 Loaded Through a Pin
 stress concentration factor distribution along bore, 93030
 Under OutofPlane Bending
 stress concentration factor distribution along bore, 93030
 Uniaxial Loading
 stress concentration factors for circular and optimised shape holes in finite plates, 15005
 stress concentration factors for circular and optimised shape holes in large plates, 15005
 stress decay from hole edge transverse to loading direction, 85045
 Various InPlane Loadings
 stress concentration factors for single hole, 09014, 80027, 93030
 stress concentration factors for two holes, 67023, 75007, 85045
 see also
 Flat Plates
 SkinRib Joints
 effect on fatigue strength under acoustic loading, 72015
 Effect on Fatigue Strength of Joints
 discussion of benefit due to proportion of shear transmitted by friction, 70018
 Loaded Pins in Wide Flat Plates
 stress intensity factors for hole corner cracks, 83033
 Definition and Use in Specifying TakeOff Distance Available, 87018
 Critical attachment loads of cleats (clips), 14006
 Elastic analysis of cleats (clips), 14006
 Experimental and theoretical comparison of cleat strength, 14006
 Experimental and theoretical comparison of clip strength, 14006
 Experimental strength of cleats (clips), 14006
 Formed angle sheet in metal cleats (clips), 14006
 Good design practice of cleats (clips), 14006
 Machined angle sheet in metal cleats (clips), 14006
 Plastic analysis of cleats (clips), 14006
 Theory for shear cleats (clips), 14006
 see
 Wings
 Definition, 71003
 Transmitting Tension Between Angle Sections
 avoidance of separation under load, 84039
 calculation of maximum bending moments, 84039
 comparison of test data with prediction, 84039
 effect of plastic hinges on load capacity, 84039
 failure types, 84039
 methods of idealisation for strength analysis, 84039
 possible designs and design guidance, 84039
 practical worked examples of strength analysis, 84039
 see
 Viscometers
 Pressure Change Prediction in Pipeline Due to Closure
 Pressure Drop Across, 69022
 see
 Frequency
 Advantages and Limitations as Method of Fatigue Strength Improvement in Steels, 89031
 comparison with other possible surface treatments, 89031
 Effect on Fatigue Limit Reduction of Steel Due to Chromium Plating, 86033
 Effect on Fatigue Strength of Plain Shafts With InterferenceFit Collars, 68005
 Effect on Fatigue Strength of Steel Screw Threads, 67020, 68045, 80028, 84037
 Mechanism of Fatigue Strength Improvement, 89031
 Combining Spectra Levels, 08018
 Use of Process Integration
 to select and place utilities, 89001
 Fouling, Slagging and Its Control
 TurboJet Engines
 specific heat capacity ratio, 69008
 see
 Heat Exchangers
 Beams of Sandwich Construction With SpeciallyOrthotropic or Unbalanced Faceplates
 program for prediction of faceplate wrinkling, 87013
 Considerations in Design Against Acoustic Fatigue, 86025
 Corner Section Under Bending Moment, Radial Shear and Tangential Direct Load
 loading to cause failure, 94019
 prediction of failure in ply material or at ply interfaces, 94019
 throughthickness radial and shear stresses, 94019
 Criteria for Failure of Individual Lamina Under InPlane Loading
 applications and limitations of various, 83014
 comparison of various with experimental results, 83014
 expressions for and graphs of various, 83014
 strength testing methods to obtain input data for, 83014
 Criterion for Edge Delamination Failure, 95028
 Criterion for Failure Through Thickness
 in ply material or at ply interfaces, 94019
 Curved Rectangular SpeciallyOrthotropic Plates
 program for buckling stress (biaxial and pressure loads), 94007
 program for natural frequencies with uniform inplane biaxial loading, 89011
 program for stress response to acoustic loading, 84008
 Dynamic Response
 Flat Laminated Plates Under Uniaxial Strain and Subjected to Temperature Change
 program for estimation of interlaminar stresses at free edges, 95028
 use of interlaminar stresses at free edges to predict delamination, 95028
 Flat Panels With FibreReinforced Unflanged Integral Stiffeners
 local buckling stress under biaxial compression, 73015
 Flat Rectangular Orthotropic Plates With SimplySupported Edges
 design curves for radiation efficiency averaged in onethird octave bands, 02009
 program for averaged radiation efficiency, 02009
 use of averaged radiation efficiency to calculate sound radiation, 02009
 Flat Rectangular Plates Under All Combinations of Biaxial Loading and Shear
 program for buckling stress for various edge conditions, 81047, 94005
 Flat Rectangular SpeciallyOrthotropic Plates
 program for natural frequencies, 83036
 program for natural frequencies with uniform inplane biaxial loading and shear, 90016, TM 71
 program for stress response to acoustic loading, 84008
 Flat Rectangular SpeciallyOrthotropic Plates Under All Combinations of Biaxial Loading and Shear
 program for buckling stress for various edge conditions, 80023, 81047, 94005
 Flat Rectangular SpeciallyOrthotropic Plates Under InPlane Loads and Bending Moments
 choice of most effective ply thicknesses and layup, 96036
 Flat Rectangular SpeciallyOrthotropic Plates Under Normal Pressure
 program for deflections, inplane moments, forces, stresses, strains, 93011
 Flat Rectangular Unbalanced Plates Under Biaxial Loading
 program for buckling stress for simplysupported edges, 94006
 Flat Square SpeciallyOrthotropic Plates
 program for natural frequencies with uniform inplane biaxial loading and shear, 90016, TM 71
 Flat Square SpeciallyOrthotropic Plates Under All Combinations of Biaxial Loading and Shear
 program for buckling stress for various edge conditions, 80023, 81047, 94005
 Flat Square SpeciallyOrthotropic Plates Under Normal Pressure
 program for deflections, inplane moments, forces, stresses, strains, 93011
 Flat Strips
 stiffness under biaxial compression with distributed edge couples, 73007
 Laminated Plates Tapered in Thickness by Ply DropOff
 program to predict uniaxial load for delamination, 91003
 use of fracture mechanics to predict delamination, 91003
 Laminates
 calculation of elastic constants and stiffnesses, 83035, 94003
 calculation of strains in layers due to external loads and thermal effects, 94004
 calculation of stresses in layers due to external loads and thermal effects, 94004
 curvatures and strains due to external loads and thermal effects, 94004
 damage due to thermal loads, 84018
 damage in unbalanced due to holding flat, 84018
 fatigue strength of aluminiumglass fibre epoxy (GLARE) under acoustic loading, 84027
 fatigue strength of carbon fibreepoxy under acoustic loading, 84027
 formulae for transforming stress and strain values between axes systems, 94003
 program for damping, 85012
 program for elastic constants and stiffnesses, 83035
 program to compute throughthickness shear stiffnesses, 89013
 program to predict layer failure history, 84018
 stacking sequences for special orthotropy, 82013
 stiffnesses related to any reference plane in terms of those related to central plane, 94003
 values of specific damping capacity for fibrereinforced, 85012
 Modes of Failure in Multidirectional Laminate

 see also
 Delamination
 discussion and illustration of modes due to inplane loading, 82025
 Modes of Failure in Unidirectional Laminate
 discussion and illustration of all modes, 82025
 Program to Compute Stress and Strain Around Circular Hole, 85001
 use to design reinforcement in fibrereinforced composites, 86003
 Program to Design Most Effective Laminate to Support InPlane Loads and Bending Moments
 choice of ply thicknesses and layup using 0?, 90?, ?45? layers only, 96036
 Sandwich Panels With Laminated Faceplates
 program to compute throughthickness shear stiffnesses, 89013
 Sandwich Panels With Orthotropic Faceplates
 program for lower natural frequencies (bending modes), 86024
 program for natural frequencies, 85037
 program for strain response to acoustic loading, 86024
 Sandwich Panels With SpeciallyOrthotropic or Unbalanced Faceplates
 program for prediction of faceplate wrinkling, 88015
 SkinRib Joints in Bonded or Riveted Fibre Reinforced
 fatigue strength under acoustic loading, 84027
 Stacking Sequences for Special Orthotropy, 82013
 selection to meet stiffness criteria, 82013
 stiffness matrices for laminates, 82013
 Structural Damping
 discussion of effect of fibre angle, length and volume, and temperature, 91012
 typical values, 91012
 Struts of Sandwich Construction With SpeciallyOrthotropic or Unbalanced Faceplates
 program for prediction of faceplate wrinkling, 87013
 Testing Endurance by Simulated Acoustic Loading Applied to Representative Element

 see
 Acoustic Fatigue
 Unbalanced Plates
 discussion of effect of coupling on buckling behaviour, 94006
 program for buckling stress under biaxial loading of rectangular simplysupported, 94006
 types of stiffness coupling, 94003
 see
 Air
Explore ESDU
ESDU Series:
 Aerodynamics
 Aircraft Noise
 Composites
 Dynamics
 Fatigue  Endurance Data
 Fatigue  Fracture Mechanics
 Fluid Mechanics, Internal Flow
 Fluid Mechanics, Internal Flow (Aerospace)
 Heat Transfer
 Mechanisms
 Performance
 Physical Data, Chemical Engineering
 Stress and Strength
 Structures
 Transonic Aerodynamics
 Tribology
 Vibration and Acoustic Fatigue
 Wind Engineering
ESDU Packages:
 Home  AZ index  Contact Us  Help  About Us  Terms of Use  Privacy Policy  How we use cookies  How to Subscribe 
© 19992019 IHS ESDU, part of IHS Inc.