ESDU A-Z Index: CI-COM

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

| c-ch | CI-COM | con-cq | cr-cz |

Circling Flight
see
Turning Manoeuvre
Circlip Grooves
Axial Load and/or Bending
stress concentration data, 79032
Design Against Fatigue, 79032
Torsion
stress concentration data, 79032
Circular-arc Afterbody
see
Afterbody
Circular-arc Sections
see also
Beams in General
Beams of Any Hollow or Solid Polygonal Section
Corner Section in Specially-orthotropic Plates
Struts in General
Shear Centre, STRUCT 00.06.04
Circular Cylinders
see
Cylinders of Circular Section
Circular Frames
Introduction to Data Items on, STRUCT 03.06.00
Under Concentrated Loads and Couples
bending moments, STRUCT 03.06.01
direct forces, STRUCT 03.06.02
radial deflections, STRUCT 03.06.04
shear forces, STRUCT 03.06.03
Circular Frames Supported By A Shell
Equations for Deflections and Forces Due to Applied Concentrated Couples and Loads
angular deflections, 83043
bending moments, 83043
direct and shear forces, 83043
radial and tangential deflections, 83043
shear flow from shell, 83043
Graphical Data for Deflections and Forces Due to Applied Concentrated Couples
angular deflections, STRUCT 03.06.15
bending moments, STRUCT 03.06.06
direct forces, STRUCT 03.06.09
effect of adjacent frames, STRUCT 03.06.17
effect of shell longitudinal flexibility, STRUCT 03.06.17
radial and tangential deflections, STRUCT 03.06.15
shear flow from shell, STRUCT 03.06.16
shear forces, STRUCT 03.06.12
Graphical Data for Deflections and Forces Due to Applied Concentrated Radial Loads
angular deflections, STRUCT 03.06.15
bending moments, STRUCT 03.06.08
direct forces, STRUCT 03.06.11
effect of adjacent frames, STRUCT 03.06.17
effect of shell longitudinal flexibility, STRUCT 03.06.17
radial and tangential deflections, STRUCT 03.06.15
shear flow from shell, STRUCT 03.06.16
shear forces, STRUCT 03.06.14
Graphical Data for Deflections and Forces Due to Applied Concentrated Tangential Loads
angular deflections, STRUCT 03.06.15
bending moments, STRUCT 03.06.07
direct forces, STRUCT 03.06.10
effect of adjacent frames, STRUCT 03.06.17
effect of shell longitudinal flexibility, STRUCT 03.06.17
radial and tangential deflections, STRUCT 03.06.15
shear flow from shell, STRUCT 03.06.16
shear forces, STRUCT 03.06.13
Circular Holes
Aerodynamic Characteristics
see
Excrescences
Stress Analysis
see
Circular Holes in Bars or Strips
Circular Holes in Flat Plates
Circular Holes in Orthotropic Plates
Circular Holes in Round Rods and Tubes
Circular Holes in Bars or Strips
Stress Concentration Due to Bending In-Plane
single hole, 09014
Stress Concentration Due to Bending Out of Plane
single hole, 09014
Stress Concentration Due to Uniaxial Tension
single hole, 09014
two equal diameter holes across a strip, 85045
Circular Holes in Flat Plates
Biaxial Loading
stress concentration factors for circular and optimised shape holes in large plates, 15005
Effect of Buckling in Shear
see
Flat Square Plates with Central Circular Hole
Flat Square Plates with Central Flanged Circular Hole
Loaded Through a Pin
stress concentration factor distribution along bore, 93030
Under Out-of-Plane Bending
stress concentration factor distribution along bore, 93030
Uniaxial Loading
stress concentration factors for circular and optimised shape holes in finite plates, 15005
stress concentration factors for circular and optimised shape holes in large plates, 15005
stress decay from hole edge transverse to loading direction, 85045
Various In-Plane Loadings
see also
Reinforced Circular Holes in Flat Plates
Reinforced Circular Holes Near Edge of Flat Plates
stress concentration factors for single hole, 09014, 80027, 93030
stress concentration factors for two holes, 67023, 75007, 85045
Circular Holes in Orthotropic Plates
see also
Laminated Construction Using Composites
Program to Compute Stress and Strain Distribution Around Perimeter, 85001
use to design reinforcement in fibre-reinforced laminates, 86003
Circular Holes in Round Rods and Tubes
Axial Load
influence of scale on fatigue strength, 87016
stress concentration factors, 89048
Under Bending
stress concentration factors, 89048
Under Torsion
stress concentration factors, 89048
Circular Plates
see also
Flat Plates
Inclined to Flow
centre of pressure and normal force, 70015
Normal to Flow
interference effects between pair, 70015
normal force, 70015
pressure distribution on both faces, 83020
Stress Analysis
see
Flat Circular Plates
Circular Sections
see
Corner Section in Specially-orthotropic Plates
Cylinders of Circular Section
Pipes
Civil Airworthiness Requirements
see
Airworthiness Requirements
Cladding
see also
Anodising
Bonded Double-strap Joints in Clad Aluminium Alloys
Bonded Single-lap Joints in Clad Aluminium Alloys
Wear Resistant Surface Coatings and Treatments
Skin-Rib Joints
effect on fatigue strength under acoustic loading, 72015
Clamping Pressure
Effect on Fatigue Strength of Joints
see also
Bolted Double Lap Joints in Steels
Fretting Fatigue
discussion of benefit due to proportion of shear transmitted by friction, 70018
Clearance Fit
see also
Fretting Fatigue
High-load Transfer Joints in Aluminium Alloys
Interference Fit
Low-load Transfer Joints in Aluminium Alloys
Lugs (Fatigue Strength)
Lugs (Static Strength)
Lugs (Stress Concentration Factors)
Lugs (Stress Intensity Factors)
Medium-load Transfer Joints in Aluminium Alloys
Loaded Pins in Wide Flat Plates
stress intensity factors for hole corner cracks, 83033
Clearance Seals
see
Reciprocating Seals
Rotary Seals
Clearway
Definition and Use in Specifying Take-Off Distance Available, 87018
Cleats
Critical attachment loads of cleats (clips), 14006
Elastic analysis of cleats (clips), 14006
Experimental and theoretical comparison of cleat strength, 14006
Experimental and theoretical comparison of clip strength, 14006
Experimental strength of cleats (clips), 14006
Formed angle sheet in metal cleats (clips), 14006
Good design practice of cleats (clips), 14006
Machined angle sheet in metal cleats (clips), 14006
Plastic analysis of cleats (clips), 14006
Theory for shear cleats (clips), 14006
Climb
see
Cabin Conditions
Flight Path Optimisation
Range
Rate of Climb
Close-coupled Lifting Surfaces
see
Wings
Cloud Point
Definition, 71003
Club-foot Fittings
Transmitting Tension Between Angle Sections
avoidance of separation under load, 84039
calculation of maximum bending moments, 84039
comparison of test data with prediction, 84039
effect of plastic hinges on load capacity, 84039
failure types, 84039
methods of idealisation for strength analysis, 84039
possible designs and design guidance, 84039
practical worked examples of strength analysis, 84039
Coaxial Cylinder Viscometer
see
Viscometers
Cocks
Pressure Change Prediction in Pipeline Due to Closure
see
Pipes with Internal Flow
Pressure Transients in Gas (and Steam) Internal Flow
Pressure Transients in Liquid Internal Flow
Pressure Drop Across, 69022
Coils
see
Condensers
Forced Convection Heat Transfer
Pressure Drop in Internal Flow
Coincidence Frequency
see
Frequency
Colburn J-factor
see
Forced Convection Heat Transfer
Cold Rolling
Advantages and Limitations as Method of Fatigue Strength Improvement in Steels, 89031
comparison with other possible surface treatments, 89031
Effect on Fatigue Limit Reduction of Steel Due to Chromium Plating, 86033
Effect on Fatigue Strength of Plain Shafts With Interference-Fit Collars, 68005
Effect on Fatigue Strength of Steel Screw Threads, 67020, 68045, 80028, 84037
Mechanism of Fatigue Strength Improvement, 89031
Colebrook-white Friction Law
Flow in Straight Pipes, 66027, 82021
Collapse Coefficient
see
Cylinders of Circular Section (Strength and Vibration)
Collars
see
Shafts with Interference-fit Collars
Columns
see
Struts in General
Struts of Bulb Angle Section
Struts of Channel Section
Struts of I-section
Struts of Lipped or Unlipped Z-section
Struts of Sandwich Construction
Struts of Thin-walled Open Section
Struts of Tubular Section
Combination
Combining Spectra Levels, 08018
Combined Heat and Power Systems
Use of Process Integration
to select and place utilities, 89001
Combustion Plant
Fouling, Slagging and Its Control
see
Fouling in Combustion Plant
Combustion Products
Turbo-Jet Engines
specific heat capacity ratio, 69008
Compact Heat Exchangers
see
Heat Exchangers
Composite Curve
Program to Derive for Shell-and-Tube Heat Exchanger and Utilities Network, 00043
Use in Process Integration, 87030, 89001, 90033
Use in Water Conservation and Re-Use
see
Water Conservation in Process Plants
Composite Structures
see also
Cylinders of Laminated Construction
Spherical Shells of Laminated Construction
Beams of Sandwich Construction With Specially-Orthotropic or Unbalanced Faceplates
program for prediction of faceplate wrinkling, 87013
Considerations in Design Against Acoustic Fatigue, 86025
Corner Section Under Bending Moment, Radial Shear and Tangential Direct Load
loading to cause failure, 94019
prediction of failure in ply material or at ply interfaces, 94019
through-thickness radial and shear stresses, 94019
Criteria for Failure of Individual Lamina Under In-Plane Loading
applications and limitations of various, 83014
comparison of various with experimental results, 83014
expressions for and graphs of various, 83014
strength testing methods to obtain input data for, 83014
Criterion for Edge Delamination Failure, 95028
Criterion for Failure Through Thickness
in ply material or at ply interfaces, 94019
Curved Rectangular Specially-Orthotropic Plates
program for buckling stress (biaxial and pressure loads), 94007
program for natural frequencies with uniform in-plane biaxial loading, 89011
program for stress response to acoustic loading, 84008
Dynamic Response
see
Response of Lightweight Structures
Flat Laminated Plates Under Uniaxial Strain and Subjected to Temperature Change
program for estimation of interlaminar stresses at free edges, 95028
use of interlaminar stresses at free edges to predict delamination, 95028
Flat Panels With Fibre-Reinforced Unflanged Integral Stiffeners
local buckling stress under biaxial compression, 73015
Flat Rectangular Orthotropic Plates With Simply-Supported Edges
design curves for radiation efficiency averaged in one-third octave bands, 02009
program for averaged radiation efficiency, 02009
use of averaged radiation efficiency to calculate sound radiation, 02009
Flat Rectangular Plates Under All Combinations of Biaxial Loading and Shear
program for buckling stress for various edge conditions, 81047, 94005
Flat Rectangular Specially-Orthotropic Plates
program for natural frequencies, 83036
program for natural frequencies with uniform in-plane biaxial loading and shear, 90016, TM 71
program for stress response to acoustic loading, 84008
Flat Rectangular Specially-Orthotropic Plates Under All Combinations of Biaxial Loading and Shear
program for buckling stress for various edge conditions, 80023, 81047, 94005
Flat Rectangular Specially-Orthotropic Plates Under In-Plane Loads and Bending Moments
choice of most effective ply thicknesses and lay-up, 96036
Flat Rectangular Specially-Orthotropic Plates Under Normal Pressure
program for deflections, in-plane moments, forces, stresses, strains, 93011
Flat Rectangular Unbalanced Plates Under Biaxial Loading
program for buckling stress for simply-supported edges, 94006
Flat Square Specially-Orthotropic Plates
program for natural frequencies with uniform in-plane biaxial loading and shear, 90016, TM 71
Flat Square Specially-Orthotropic Plates Under All Combinations of Biaxial Loading and Shear
program for buckling stress for various edge conditions, 80023, 81047, 94005
Flat Square Specially-Orthotropic Plates Under Normal Pressure
program for deflections, in-plane moments, forces, stresses, strains, 93011
Flat Strips
stiffness under biaxial compression with distributed edge couples, 73007
Laminated Plates Tapered in Thickness by Ply Drop-Off
program to predict uniaxial load for delamination, 91003
use of fracture mechanics to predict delamination, 91003
Laminates
calculation of elastic constants and stiffnesses, 83035, 94003
calculation of strains in layers due to external loads and thermal effects, 94004
calculation of stresses in layers due to external loads and thermal effects, 94004
curvatures and strains due to external loads and thermal effects, 94004
damage due to thermal loads, 84018
damage in unbalanced due to holding flat, 84018
fatigue strength of aluminium-glass fibre epoxy (GLARE) under acoustic loading, 84027
fatigue strength of carbon fibre-epoxy under acoustic loading, 84027
formulae for transforming stress and strain values between axes systems, 94003
program for damping, 85012
program for elastic constants and stiffnesses, 83035
program to compute through-thickness shear stiffnesses, 89013
program to predict layer failure history, 84018
stacking sequences for special orthotropy, 82013
stiffnesses related to any reference plane in terms of those related to central plane, 94003
values of specific damping capacity for fibre-reinforced, 85012
Modes of Failure in Multidirectional Laminate
see also
Delamination
discussion and illustration of modes due to in-plane loading, 82025
Modes of Failure in Unidirectional Laminate
discussion and illustration of all modes, 82025
Program to Compute Stress and Strain Around Circular Hole, 85001
use to design reinforcement in fibre-reinforced composites, 86003
Program to Design Most Effective Laminate to Support In-Plane Loads and Bending Moments
choice of ply thicknesses and lay-up using 0?, 90?, ?45? layers only, 96036
Sandwich Panels With Laminated Faceplates
program to compute through-thickness shear stiffnesses, 89013
Sandwich Panels With Orthotropic Faceplates
program for lower natural frequencies (bending modes), 86024
program for natural frequencies, 85037
program for strain response to acoustic loading, 86024
Sandwich Panels With Specially-Orthotropic or Unbalanced Faceplates
program for prediction of faceplate wrinkling, 88015
Skin-Rib Joints in Bonded or Riveted Fibre Reinforced
fatigue strength under acoustic loading, 84027
Stacking Sequences for Special Orthotropy, 82013
selection to meet stiffness criteria, 82013
stiffness matrices for laminates, 82013
Structural Damping
discussion of effect of fibre angle, length and volume, and temperature, 91012
typical values, 91012
Struts of Sandwich Construction With Specially-Orthotropic or Unbalanced Faceplates
program for prediction of faceplate wrinkling, 87013
Testing Endurance by Simulated Acoustic Loading Applied to Representative Element
see
Acoustic Fatigue
Unbalanced Plates
discussion of effect of coupling on buckling behaviour, 94006
program for buckling stress under biaxial loading of rectangular simply-supported, 94006
types of stiffness coupling, 94003
Compressibility (Compression ) Factor
see
Air
Compressibility Effects in Aerodynamics
Factors Applied to Allow for
see also
Analogous Body Concept
Analogous Wing Concept
Goethert Compressibility Rule
Kuchemann-Weber or Prandtl-Glauert, 72025
Wilby, 72025, 76002
Compressive Properties
see
Aluminium Alloys
Magnesium Alloys
Nickel Steels
Refractory Lining Materials
Steels
Compressor Noise
see
Turbomachinery Noise

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z 

| c-ch | CI-COM | con-cq | cr-cz |