Subsonic base drag of cylindrical bodies with conical boat-tails.
Abstract:ESDU 76033 gives curves derived by correlating experimental data from a number of different sources enabling the base drag coefficient, based on body maximum cross-sectional area, to be predicted to within 0.025. Two-sets of curves are given, one for boat-tail angles below 16 deg and one for angles exceeding 16 deg; the drag depends on the ratio of base to maximum diameter, and boat-tail angle. The data were found to be independent of Mach number below 0.8 and it proved impossible to isolate any Reynolds number effects.
|Data Item ESDU 76033|
The graphs listed below are available only to subscribers.
|Figure 1||Base drag coefficient for 3° =< β =< 14°|
|Figure 2||Base drag coefficient for β >= 16°|
- Aircraft Noise
- Fatigue - Endurance Data
- Fatigue - Fracture Mechanics
- Fluid Mechanics, Internal Flow
- Fluid Mechanics, Internal Flow (Aerospace)
- Heat Transfer
- Physical Data, Chemical Engineering
- Stress and Strength
- Transonic Aerodynamics
- Vibration and Acoustic Fatigue
- Wind Engineering
Aerospace Materials Data
Additional Engineering References