ESDU Fatigue - Endurance Data Series

Expand all: Expand all  Collapse all: Collapse all

  • Section 1: Organisational Documents
    • ESDU 04017
      Fatigue - Endurance Data Series organisation: preface amendment record.
  • Section 2: Endurance Data - General
    • ESDU CFS
      Conversion factors
    • ESDU FAT A.00.01
      The effect of mean stress on fatigue strength (plain test piece).
    • ESDU FAT A.00.02
      The effect of mean stress on fatigue strength (test piece with stress concentration).
    • ESDU 67014
      Fatigue strength of thick cylinders under internal pressure.
    • ESDU 70016
      Terms and notation for fatigue endurance data.
    • ESDU 70018
      General principles of design in relation to fatigue.
    • ESDU 90031
      Fretting fatigue.
    • ESDU 92015
      Guide to the effect of shot peening on fatigue strength.
    • ESDU 04022
      An introduction to low-cycle fatigue phenomena
  • Section 3: Aluminium Alloys - Endurance Data
    • ESDU FAT E.07.01
      Endurance of aluminium alloys (unclad) (in bending).
    • ESDU FAT E.07.02
      Notes supplementary to E.07.01 on the fatigue strength of aluminium alloys.
    • ESDU FAT E.07.03
      The effect of mean stress on the endurance of aluminium alloys.
    • ESDU 74038
      Effect of an axial compressive mean stress on the fatigue strength of aluminium alloy bar (plain and notched).
    • ESDU 87026
      Fatigue strength of anodised aluminium alloy.
    • ESDU 89004
      Effect of fretting on fatigue strength of aluminium alloys.
  • Section 4: Titanium Alloys - Endurance Data
    • ESDU 77027
      Fatigue of wrought and cast Ti-6Al-4V titanium alloy. (In bending and under axial loading.)
    • ESDU 77033
      Fatigue of wrought and cast annealed Ti-5Al-2.5Sn titanium alloy. (In bending and under axial loading.)
    • ESDU 78014
      Fatigue of wrought titanium alloys Ti-6Al-6V-2Sn and Ti-4Al-4Mo-2Sn-0.5Si.
    • ESDU 88027
      Effect of fretting on fatigue strength of titanium alloys.
  • Section 5: Steels - Endurance Data
    • ESDU 71027
      Endurance of high strength steels (in bending).
    • ESDU 74016
      The fatigue strength at high endurance of notched low alloy steel specimens (in bending and under axial loading, zero mean stress).
    • ESDU 74027
      The effect of surface roughness on the fatigue limit of steels (at zero mean stress).
    • ESDU 86033
      The effect of electrodeposited chromium on the fatigue strength of low alloy steel.
    • ESDU 88008
      Fatigue limit of unnotched steels (related to tensile strength).
    • ESDU 04019
      Endurance of high-strength steels.
  • Section 6: Statistical Methods
    • ESDU 91041
      The statistical analysis of data from Normal distributions, with particular reference to small samples.
    • ESDU 92040
      An introduction to the statistical analysis of engineering data.
  • Section 7: Endurance Estimates - Constant or Variable Amplitude Loading
    • ESDU 69024
      The cumulative damage of aluminium alloy specimens under variable amplitude fatigue loading.
    • ESDU 76014
      Estimation of endurance and construction of constant amplitude S-N curves from related data corrected for notch and mean stress effects.
    • ESDU 95006
      Fatigue life estimation under variable amplitude loading using cumulative damage calculations.
    • ESDU 97018
      Standard fatigue loading sequences.
    • ESDU 97024
      Derivation of endurance curves from fatigue test data, including run-outs
  • Section 8: Life Estimation of Structures
    • ESDU 69023
      Average gust frequencies. Subsonic transport aircraft.
    • ESDU 75008
      Frequencies of vertical and lateral load factors resulting from ground manoeuvres of aircraft.
    • ESDU 79024
      Estimation of the endurance of civil aircraft wing structures.
  • Section 9: Stress Concentrations
    • ESDU 64001
      Guide to stress concentration data.
    • ESDU 67023
      Geometric stress concentrations. Two equal unreinforced circular holes in infinite flat plates.
    • ESDU 71011
      Stresses due to interference-fit pins and bushes in plates, strips or lugs.
    • ESDU 75007
      Geometric stress concentration factors: two adjacent unreinforced circular holes in infinite flat plates.
    • ESDU 75033
      Elastic stress concentration factors. Double radius fillets in shouldered shafts in torsion.
    • ESDU 79008
      Elastic stress concentration factors. Rectangular notch in the edge of a wide flat plate in tension.
    • ESDU 80027
      Elastic stress concentration factors. Single reinforced and unreinforced holes in infinite plates of isotropic materials.
    • ESDU 81006
      Stress concentration factors. Axially loaded lugs with clearance-fit pins.
    • ESDU 85045
      Stress concentrations: interaction and stress decay for selected cases.
    • ESDU 89048
      Elastic stress concentration factors. Geometric discontinuities in rods and tubes of isotropic materials.
    • ESDU 93030
      Three-dimensional elastic stress concentration factors. Plain or countersunk hole in a wide plate subjected to tension, bending or pin loading.
    • ESDU 09014
      Elastic stress concentration factors. Geometric discontinuties in flat bars or strips of isotropic material.
  • Section 10: Screw Threads
    • ESDU 67020
      Fatigue strength of steel screw threads with large root radii under axial loading.
    • ESDU 67034
      Effect of inclined nut seatings on the fatigue strength of steel screw threads.
    • ESDU 68045
      Fatigue strength of large steel screw threads under axial loading.
    • ESDU 83012
      Fatigue strength of cold-rolled titanium alloy screw threads under axial load (room temperature and elevated temperatures).
    • ESDU 84037
      Fatigue strength of external and internal steel screw threads under axial loading. (Standard forms not greater than 1.0 inch diameter.)
  • Section 11: Structural Joints
    • ESDU FAT E.05.01
      Endurance of structural joints. (Aluminium alloy material - tensile loading.)
    • ESDU FAT E.05.06
      Endurance of bonded lap joints. (Aluminium alloy sheet material; phenolic resin/vinyl powder glue, tensile loading.)
    • ESDU FAT E.05.07
      Endurance of bonded double strap joints. (Aluminium alloy sheet material; phenolic resin/vinyl powder glue, tensile loading.)
    • ESDU 79031
      Endurance of riveted lap joints (aluminium alloy sheet and rivets).
    • ESDU 89046
      Fatigue of aluminium alloy joints with various fastener systems. Low load transfer.
    • ESDU 90009
      Fatigue of aluminium alloy joints with various fastener systems. Medium load transfer.
    • ESDU 90018
      Fatigue of aluminium alloy joints with various fastener systems. High load transfer.
  • Section 12: Lugs
    • ESDU FAT A.05.02
      Estimation of endurance of pin joints.
    • ESDU 77017
      Endurance of titanium alloy lugs (Ti-6Al-4V, annealed and Ti-4Al-4Mo-2Sn-0.5Si).
    • ESDU 80007
      Endurance of aluminium alloy lugs with nominally push-fit pins (tensile mean stress).
    • ESDU 82022
      Endurance of steel lugs with clearance-fit pins (Tensile mean stress)
    • ESDU 84025
      Endurance of aluminium alloy lugs with steel interference-fit pins or bushes.