Structures of non-circular cross section: dynamic response due to vortex shedding.
Abstract:ESDU 90036 provides procedures for the calculation of the across-wind response of structures arising from vortex shedding. It deals with structures of non-circular cross-sectional shape and is applicable to buildings, towers, stacks and structural elements. The methods on which the calculation procedures are based have been derived from measurements on parallel-sided structures of regular cross section with sharp corners aligned symmetrically with the flow. Such shapes include those of square, rectangular, triangular and polygonal cross section and typical structural member shapes such as I- and H-beams. The effect of rounded edges and taper can be important and guidance is given on how to extend the applicability of the methods to these cases. The procedures are summarized in calculation-sheet format and provide estimates of the rms and maximum amplitude at the critical wind speed for vortex shedding and also for off-critical wind speeds. Several worked examples are included and a comparison is made between predicted and measured responses from a number of wind tunnel studies.
|Data Item ESDU 90036|
The graphs listed below are available only to subscribers.
This Data Item contains 10 interactive graph(s) as listed below.
NOTE: There is currently an issue whereby users running Java 8 are unable to access the graphs. Click here for more details...
|Figure 1a||Strouhal number for various section shapes|
|Figure 1b||Strouhal number for various section shapes|
|Figure 2||Values of C D∞ for two-dimensional rectangular sections|
|Figure 3a||Values of fluctuating lift coefficient for stationary cylinder|
|Figure 3b||Values of fluctuating lift coefficient for stationary cylinder|
|Figure 4a||Integral parameter FLs accouting for spanwise correlation effect on CL′|
|Figure 4b||Integral parameter FLs accouting for spanwise correlation effect on CL′|
|Figure 5a - Part 1||Integral parameter fη accouting for amplitude effect on CL′|
|Figure 5a - Part 2||Integral parameter fη accouting for amplitude effect on CL′|
|Figure 5b||Integral parameter fη accouting for amplitude effect on CL′|
- Aircraft Noise
- Fatigue - Endurance Data
- Fatigue - Fracture Mechanics
- Fluid Mechanics, Internal Flow
- Fluid Mechanics, Internal Flow (Aerospace)
- Heat Transfer
- Physical Data, Chemical Engineering
- Stress and Strength
- Transonic Aerodynamics
- Vibration and Acoustic Fatigue
- Wind Engineering