ESDU 68005
Shafts with interference-fit collars. Part IV: fatigue strength of plain shafts.
Abstract:
The results of about 170 fatigue tests of constant diameter shafts with plain collars subjected to rotational bending loads are presented graphically. The data encompass both untreated shafts and rolled or induction/flame hardened shafts. The shafts and collars were manufactured from forged or cast steel and have tensile strengths in the range 510 to 765 MN/sq m (74000 to 119000 lbf/sq in) and shaft diameters between 10 and 240 mm (0.4 to 9.5 in). The shaft/collar geometries cover a wide range of practical values. Notes on the data are also provided.Indexed under:
- Cold Rolling
- Flame Hardening
- Induction Hardening
- Shafts with Interference-Fit Collars
- Surface Treatments
Details:
Data Item ESDU 68005 | |
---|---|
Format: |
|
Status: |
|
Previous Releases: |
|
ISBN: |
|
The Data Item document you have requested is available only to subscribers or purchasers.
- Subscribers login here.
- If you are not an ESDU subscriber you can
- find out how to subscribe, or
- purchase this Data Item from the Standards Store.